Jump to content

Indiana Jones Customs Of The Week By Hemble Creations


Bespin refugee

Recommended Posts

67375240_1296740467171311_41513573034523

This week's custom is a Disney Toybox Style Indiana Jones by Hemble Creations
67060726_1296740597171298_78933547069179


"Recipe.

Indy - is from the Disney Toybox Millennium Falcon set, I added a pic at the end of a before shot of him. I removed the belt, holster and hair and added hair using milliput and then painted the hair and facial hair using Vallejo Paints.

The jacket and pants were originally for two x 1:12 Indiana Jones figures which I had two sets made and decided to use the second set for this figure. The jacket/pants were made by a mate overseas and here is his Instagram page https://www.instagram.com/ageoftoys/.

The fedora is from the Disney's first 7" Indiana Jones figure and the whip, holster, grail, idol, bag and pistol are from the Figma Indiana Jones figure.

The belt, bag strap and whip holder were made using pleather and the whip holder has two small magnets so that the whip can be removed.

Base - is a action figure stand I have had for years and the floor and wall are stands from Figma's Professor Layton figure, the dirt is a mix of sand and spakfilla. The vines and ferns are from the local craft store and the small shrubs are from the local hobby shop.
"

Check out the image(s) of their custom below in our GALLERY!

Click here if you would like to submit your own custom figure(s) to be displayed on JediInsider.com, and be sure to check out our Custom Forum section, where you can discuss and show off your work among other customizers.

67060726_1296740597171298_7893354706917916672_n__scaled_600.jpg

67079736_1296740483837976_3437693137978392576_n__scaled_600.jpg

67239480_1296740690504622_6911065617256677376_n__scaled_600.jpg

67374492_1296740480504643_7458848860039806976_n__scaled_600.jpg

67375240_1296740467171311_4151357303452336128_n__scaled_600.jpg

67404097_1296740580504633_5657426554033012736_n__scaled_600.jpg

67570742_1296740703837954_5713868390012026880_n__scaled_600.jpg

67598656_1296740777171280_3381046277440536576_n__scaled_600.jpg

67675851_1296740573837967_2393593657836961792_n__scaled_600.jpg

67769084_1296740733837951_5369910576971513856_n__scaled_600.jpg

  • Like 1
Link to comment
Share on other sites

  • 1 year later...
151291638_1804192419759444_5057389968663


"...the figures are from Hasbro and the ladder is made from balsa wood and string and the stone wall is a piece of old plastic fake rock used for model railways."

Click here if you would like to submit your own custom figure(s) to be displayed on JediInsider.com, and be sure to check out our Custom Forum section, where you can discuss and show off your work among other customizers.
Link to comment
Share on other sites

  • 2 years later...

340366502_6615393945140836_5735923963155

6 Inch Indy & The Golden Idol By Hemble Creations

Recipe.

Indy - is a repainted 6" figure from the new Hasbro line and I used Vallejo Paints and pastels to paint and weather him and the gold comes with the figure but there is no hair detail on the back so I used a model knife and added the hair.

idol base - is printed by https://syndicatecustoms.com.au/ and I painted and weathered is using Vallejo paints and pastel chalks and the foliage is from Model Scene and I just pulled apart what I needed and glued it in place.


Check out more images of their custom below in our GALLERY!

If you would like to submit your own custom figure(s) to be displayed on JediInsider.com, be sure to check out our Custom Forum section, where you can discuss and show off your work among other customizers.

340297289_1354314228472922_5532624817580793833_n.jpg

340319353_6012240132227255_860828361389430634_n.jpg

340329264_150406484642024_4614555380318790157_n.jpg

340337456_580053327423425_4309898035011315620_n.jpg

340366502_6615393945140836_5735923963155133312_n.jpg

340366767_168690169410480_4727784630867800682_n.jpg

340375042_1006125827023926_4801717517032199495_n.jpg

340397203_525083236490687_5504457568005747226_n.jpg

340413973_682325647031930_2769352288265229242_n.jpg

340437527_785325356047326_6373893972258266181_n.jpg

340481354_1314879796043393_2787447409892969745_n.jpg

340485772_136488289363186_3836510036853015642_n.jpg

340500360_1819865008398819_4734427119213542724_n.jpg

340765760_600819818391027_7739193801192956405_n.jpg

Link to comment
Share on other sites

  • Bespin refugee changed the title to Lucasfilm Custom Of The Week: 6" Indy & The Golden Idol By Hemble Creations
  • 1 month later...
"I've Got A Bad Feeling" By Hemble Creations

Hi All,

" I've got a bad feeling" 7 inch scale.

Recipe.

Figure/dio - is a 3D print which I got from Hex3D over on his Patreon page https://www.patreon.com/Geoffro and again a huge thanks to Syndicate Customs for printing this out for me. The base and Solo in carbonite are PLA printed and Indy is resin printed and I painted everything using Vallejo Paints.

The dirt is garden mulch which I throw into a blender and mulch it up until it's like a sandy/dust texture and then I apply it and once dry I use Vallejo's Chocolate Brown and give it a wash over. The grass is from Model Scene and the vines I get off ebay.


Check out more images of their custom below in our GALLERY!

If you would like to submit your own custom figure(s) to be displayed on JediInsider.com, be sure to check out our Custom Forum section, where you can discuss and show off your work among other customizers.
 

347618656_476086438027961_7266264045699822762_n.jpg

347831272_2163766590488865_3512864693041327031_n.jpg

347842257_144582308529419_804331887298192071_n.jpg

347848244_259374139837635_1868945624245324538_n.jpg

348229557_1398636434270235_5353181508453071330_n.jpg

348435248_760952869084591_5246205673933388819_n.jpg

348435364_240610911913167_2288621198352123553_n.jpg

348435424_1401528503932020_1900150674235689340_n.jpg

348445914_226109743459769_7183692021144743751_n.jpg

Link to comment
Share on other sites

  • 1 month later...

 

346805161_1713701979048061_6437252170521

1:12 Club Obi-Wan (Indiana Jones And The Temple Of Doom) by Hemble Creations

"Recipe.
Diorama - the building is a 3D PLA kit from In Print Condition https://www.facebook.com/profile.php?id=100065277600673 and I got it printed from Syndicate Custom https://www.facebook.com/profile.php?id=100082987609768 and it comes in pieces so there is a little sanding and then gluing.
I painted with Vallejo paints, the tassels on the lantern are just pieces of string and dyed in red paint. The plants in the pots are from Woodland Scenics and posters I printed off the net and the frame work is made from plastic strip.
"

Check out more images of their custom below in our GALLERY!

If you would like to submit your own custom figure(s) to be displayed on JediInsider.com, be sure to check out our Custom Forum section, where you can discuss and show off your work among other customizers.

346795728_1375634963278005_1012212869995077685_n.jpg

346802861_1189332481762756_2006622408491157835_n.jpg

346805161_1713701979048061_6437252170521271509_n.jpg

346806926_159740660399031_6963588673777722564_n.jpg

346816761_194066650163287_2590919033661392405_n.jpg

346834774_772537214543223_3809152176098950167_n.jpg

346853251_626017766055031_3211681216691168135_n.jpg

346857692_1329477621339143_1068792590999034785_n.jpg

346879261_813517622993014_7467185848719796345_n.jpg

346997757_786538086086934_8593133052660667001_n.jpg

Link to comment
Share on other sites

  • Bespin refugee changed the title to Indiana Jones Customs Of The Week By Hemble Creations
  • 2 months later...

 

'Indiana Jones And The Mystery Of The Blues' By Hemble Creations

406230539_664527112332926_87103436425047

"Hi All,
Indiana Jones and the Mystery of the Blues, Custom 1:12.
Recipe.
Indy - is from Hasbro and I added the beard with putty and the jumper/scarf/tie were all made using a dried baby wipe and the buttons on the jumper are pieces of plastic.
The sax I 3D printed which isn't great as I used to many supports but it will do until I print a new one and the whip is the uncoiled whip which comes with the figure, and I just coiled it and superglued it.
"

405965482_664527048999599_1902074239390957771_n.jpg

406009191_664527205666250_2691698240823608726_n.jpg

406208691_664527132332924_7182358154117651884_n.jpg

406220810_664527028999601_1649504277310657631_n.jpg

406227837_664527045666266_6539089463735074509_n.jpg

406230539_664527112332926_8710343642504750286_n.jpg

406233192_664527155666255_7403208419770474829_n.jpg

Link to comment
Share on other sites

  • 1 month later...

416859391_684413920344245_41312198655946

Hi All,

Indiana Jones and the Treasure of the Aztecs - 1:12 scale.

Figure - is Indy from the Hasbro Indy adventure series and I glued and covered the joints and painted and weathered him using Vallejo Paints and Pastel Chalks.


Base - is MDF foam which was cut to shape and then I used individual pieces of thin foam to make the stones and glued them in place. I then went around with a pencil and added cracks and then I used a piece of sandstone and pressed it into the foam.


The pots/statues/coins/medallion were resized and printed on my 3D resin printer and they were then sanded and painted and attached to the base.


I added dirt to the base and spread it out to fill in the gaps and then added watered down PVA glue to keep it in place. The moss was done using sand/green paint/watered down PVA glue and applied with a small brush and then I added the coins


Check out more images of their custom below in our GALLERY!

If you would like to submit your own custom figure(s) to be displayed on JediInsider.com, be sure to check out our Custom Forum section, where you can discuss and show off your work among other customizers.

416855508_684414090344228_1599926085139318370_n.jpg

416859391_684413920344245_413121986559463709_n.jpg

416863579_684414117010892_8081183971338671065_n.jpg

416867556_684413917010912_6447187273967425809_n.jpg

416868588_684413997010904_858562045461049446_n.jpg

416881297_684414060344231_7460665803428896653_n.jpg

416882696_684413923677578_8030776394512055204_n.jpg

416886273_684413980344239_945052143774233874_n.jpg

416905226_684414147010889_1642514595293199828_n.jpg

Link to comment
Share on other sites

  • Find Action Figures on Ebay

×
×
  • Create New...
Sign Up For The TNI Newsletter And Have The News Delivered To You!


Entertainment News International (ENI) is the #1 popular culture network for adult fans all around the world.
Get the scoop on all the popular comics, games, movies, toys, and more every day!

Contact and Support

Advertising | Submit News | Contact ENI | Privacy Policy

©Entertainment News International - All images, trademarks, logos, video, brands and images used on this website are registered trademarks of their respective companies and owners. All Rights Reserved. Data has been shared for news reporting purposes only. All content sourced by fans, online websites, and or other fan community sources. Entertainment News International is not responsible for reporting errors, inaccuracies, omissions, and or other liablities related to news shared here. We do our best to keep tabs on infringements. If some of your content was shared by accident. Contact us about any infringements right away - CLICK HERE