Indiana Jones Customs Of The Week By Hemble Creations

[Bespin refugee]

This week's custom is a Disney Toybox Style Indiana Jones by Hemble Creations

"Recipe.

Indy - is from the Disney Toybox Millennium Falcon set, I added a pic at the end of a before shot of him. I removed the belt, holster and hair and added hair using milliput and then painted the hair and facial hair using Vallejo Paints.

The jacket and pants were originally for two x 1:12 Indiana Jones figures which I had two sets made and decided to use the second set for this figure. The jacket/pants were made by a mate overseas and here is his Instagram page https://www.instagram.com/ageoftoys/.

The fedora is from the Disney's first 7" Indiana Jones figure and the whip, holster, grail, idol, bag and pistol are from the Figma Indiana Jones figure.

The belt, bag strap and whip holder were made using pleather and the whip holder has two small magnets so that the whip can be removed.

Base - is a action figure stand I have had for years and the floor and wall are stands from Figma's Professor Layton figure, the dirt is a mix of sand and spakfilla. The vines and ferns are from the local craft store and the small shrubs are from the local hobby shop."

Check out the image(s) of their custom below in our GALLERY!

Click here if you would like to submit your own custom figure(s) to be displayed on JediInsider.com, and be sure to check out our Custom Forum section, where you can discuss and show off your work among other customizers.

[Jake_Botts]

Neat! Here’s hoping Disney sees it and takes note, there is a market for Indy stuff!

[Satam]

Yeah, I really hope they put out a Toybox Indy.

[Bespin refugee]

"...the figures are from Hasbro and the ladder is made from balsa wood and string and the stone wall is a piece of old plastic fake rock used for model railways."

Click here if you would like to submit your own custom figure(s) to be displayed on JediInsider.com, and be sure to check out our Custom Forum section, where you can discuss and show off your work among other customizers.

[Ace1o8]

“Mola Rom, prepare to meet Kali, in  Hell!!!!”

[Bespin refugee]

6 Inch Indy & The Golden Idol By Hemble Creations

Recipe.

Indy - is a repainted 6" figure from the new Hasbro line and I used Vallejo Paints and pastels to paint and weather him and the gold comes with the figure but there is no hair detail on the back so I used a model knife and added the hair.

idol base - is printed by https://syndicatecustoms.com.au/ and I painted and weathered is using Vallejo paints and pastel chalks and the foliage is from Model Scene and I just pulled apart what I needed and glued it in place.

Check out more images of their custom below in our GALLERY!

If you would like to submit your own custom figure(s) to be displayed on JediInsider.com, be sure to check out our Custom Forum section, where you can discuss and show off your work among other customizers.

[Bespin refugee]

"I've Got A Bad Feeling" By Hemble Creations

Hi All,

" I've got a bad feeling" 7 inch scale.

Recipe.

Figure/dio - is a 3D print which I got from Hex3D over on his Patreon page https://www.patreon.com/Geoffro and again a huge thanks to Syndicate Customs for printing this out for me. The base and Solo in carbonite are PLA printed and Indy is resin printed and I painted everything using Vallejo Paints.

The dirt is garden mulch which I throw into a blender and mulch it up until it's like a sandy/dust texture and then I apply it and once dry I use Vallejo's Chocolate Brown and give it a wash over. The grass is from Model Scene and the vines I get off ebay.

Check out more images of their custom below in our GALLERY!

If you would like to submit your own custom figure(s) to be displayed on JediInsider.com, be sure to check out our Custom Forum section, where you can discuss and show off your work among other customizers.

 

[Satam]

Absolutely brilliant diorama

[Bespin refugee]

 

1:12 Club Obi-Wan (Indiana Jones And The Temple Of Doom) by Hemble Creations

"Recipe.
Diorama - the building is a 3D PLA kit from In Print Condition https://www.facebook.com/profile.php?id=100065277600673 and I got it printed from Syndicate Custom https://www.facebook.com/profile.php?id=100082987609768 and it comes in pieces so there is a little sanding and then gluing.
I painted with Vallejo paints, the tassels on the lantern are just pieces of string and dyed in red paint. The plants in the pots are from Woodland Scenics and posters I printed off the net and the frame work is made from plastic strip."

Check out more images of their custom below in our GALLERY!

If you would like to submit your own custom figure(s) to be displayed on JediInsider.com, be sure to check out our Custom Forum section, where you can discuss and show off your work among other customizers.

[Satam]

Not really the right Indy for the club, but the club exterior looks very good.

[Bespin refugee]

 

'Indiana Jones And The Mystery Of The Blues' By Hemble Creations



"Hi All,
Indiana Jones and the Mystery of the Blues, Custom 1:12.
Recipe.
Indy - is from Hasbro and I added the beard with putty and the jumper/scarf/tie were all made using a dried baby wipe and the buttons on the jumper are pieces of plastic.
The sax I 3D printed which isn't great as I used to many supports but it will do until I print a new one and the whip is the uncoiled whip which comes with the figure, and I just coiled it and superglued it."

[Bespin refugee]

Hi All,

Indiana Jones and the Treasure of the Aztecs - 1:12 scale.

Figure - is Indy from the Hasbro Indy adventure series and I glued and covered the joints and painted and weathered him using Vallejo Paints and Pastel Chalks.

Base - is MDF foam which was cut to shape and then I used individual pieces of thin foam to make the stones and glued them in place. I then went around with a pencil and added cracks and then I used a piece of sandstone and pressed it into the foam.

The pots/statues/coins/medallion were resized and printed on my 3D resin printer and they were then sanded and painted and attached to the base.

I added dirt to the base and spread it out to fill in the gaps and then added watered down PVA glue to keep it in place. The moss was done using sand/green paint/watered down PVA glue and applied with a small brush and then I added the coins

Check out more images of their custom below in our GALLERY!

If you would like to submit your own custom figure(s) to be displayed on JediInsider.com, be sure to check out our Custom Forum section, where you can discuss and show off your work among other customizers.