Jump to content

Marvel & Transformers Customs


Recommended Posts

Eye's are being fixed. Some other repaints & resculpts will be done before Saint Walker, it appears I sent it to DDV and not Ibentmyman-thing. So DDV has to send Avatar Jake to bent.



Blue Lantern's: Sister Sercy, Brother Hynn


"Red Lantern", "Blue Lantern", "Orange Lantern" Hal Jordan


Arkkis Chummuck




-The Jordan's will get the shiny treatment like blue flash.

Link to comment
Share on other sites

These went to Ibentmyman-thing. Also sent a Powergirl with Mystique head for Soranik Natu.


Bodies for "Red Lantern" Jordan, "Blue Lantern" Jordan, & Arkkis Chummuck:






These will go to M1, later in the month.


Ke'Hann, "Indigo Lantern" Atom, "Parallax" Hal Jordan, "Red Lantern" Mera:



Link to comment
Share on other sites

Took apart my DCD Lex Luthor, and my sister surprised me with a Luthor 2-pack so I went to work on combining the two to get a more accurate looking Luthor.


It looks great, just need to switch out the dcd neck/peg system since the dcuc/dcsh neck sucks.


Gonna add ankle movement from a TNA AJ Styles figure.


Most of the rest of the work will be sanding and adding trim for the torso piece.



-Pictures in a while.

Link to comment
Share on other sites

Here's those "Orange Lantern" Lex Luthor pictures:







Link to comment
Share on other sites

I got finished pictures of Brother Warth:







Ibentmyman-thing got the parts for Hal Jordan's & Arkkis Chummuck. He's gonna start on the different Hal's until that avatar jake gets to him from DDV.

Link to comment
Share on other sites

This is the only picture I took of Hulk 2099:


Link to comment
Share on other sites

Got a update on Solomon Kane from spawnsauce:


This is the head fully painted. He took this pic before he glued the brim of the hat on so you could see the face:



Here's with the hat on:



He's pretty much finished actually:






Link to comment
Share on other sites

Some cool poses:





He's finishing up sculpting on the alternate head as well:


Link to comment
Share on other sites









-The cloak is removable.

-His head pops off and you can slide the strap over his neck and under the armpit.


-He can't guarantee any guns however. He's going to try one more time to make some that look alright, but no sense delaying if the whole figure is finished.


-To him, he's pretty much done except for some minor paint and cloth touch ups.


-And maybe another sword or knife I can add somewhere.

Link to comment
Share on other sites

Solomon Kane goes to the Robert E. Howard shelve along with Conan, and Red Sonja. So, it's my non-Marvel/DC shelve. Planning on getting villains and a few good guys.

Link to comment
Share on other sites

Here's some info on Solomon Kane,


General info on Solomon Kane:



Movie, which is a big influence on the custom:





Link to comment
Share on other sites

Got a update on "Red" & "Blue" Hal Jordan, and Arkkis Chummuck from Ibentmyman-thing.



"Blue Lantern" Hal Jordan:



"Red Lantern" Hal Jordan:



Arkkis Chummuck:





-ok, 3 more down, needs some touchups on the shoulders for rub.


-He ran out of clear blue for Hal's mask and back, should be getting more tomorrow so that'll be done shortly.


-Going to start on Soranik this weekend.


-Walker's still waiting around for DDV to send the Avatar fig.

Link to comment
Share on other sites

"Indigo Lantern" Atom from M1.











He's working on Munk "Indigo-2".

Link to comment
Share on other sites

That's DC "Atom" in his indigo lantern costume. The feet are correct.



Link to comment
Share on other sites

Got another cool update from Dustin on Mongul Jr. plus the Radioactive Man that Cal had started and I got in that ebay lot from last april.



Mongul Jr:










Link to comment
Share on other sites






After adding all that mass, he's been refining the sculpt and making sure things are symmetrical.


The removable arm idea is totally do-able and he's included a picture of his socket, which should definitely support it.


The chrome dots are paper fasteners anchored in tiny holes, as you can see on his shoulder straps.


He used gold grommets on the rings to avoid sculpting all those circles, but then he realized they'd allow for snap-on constructs. Dustin's thinking about how to do removable ring faces for each ring, so any ring can be used for any construct. In order to start experimenting he'll get some clear plastic rods that can fit into the rings. Ideally eight will have ring faces and a few others will allow the constructs to attach to the rings.


He thinks his right boot is headed in the right direction. It took a while to figure out how to translate those classic big boots from the drawings into 3D.


Now that he have a sense of how heavy he is (heavy), he'll give some thought to adding thigh and shin articulation. If he can find and install strong enough pins for the joints, they would really give him an edge over the DCD figure.

Link to comment
Share on other sites

Radioactive Man:








Link to comment
Share on other sites







Dustin's been tinkering with Radioactive Man on and off since he received him. The engineering of the visor and the full-body sculpt work is fantastic, so after sanding the joints he concentrated on tightening up the harness and oxygen tank details. He'll put a clear dot like the ones on Cannonball's goggles on the harness buckle.


The pouches are from DCSH Batmen. He'll put pins through the buttons to anchor them in place. The boots are based on some widely-used hazmat boots.


The oxygen tank attaches with a post to the figure's back. Because it's not glued in place, the hose is pulling it at an angle, but after painting the tank will fit snugly onto the strap.


The only other sculpt work he foresee is making pieces of belt visible between the pouches. If I prefer the way JRJR drew him in Spider-Man with a belt buckle instead of pouches straight across, he can pop off the center pouch and sculpt a buckle. Beyond that, he thinks he's ready to be primed.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Create New...
Sign Up For The TNI Newsletter And Have The News Delivered To You!

Entertainment News International (ENI) is the #1 popular culture network for adult fans all around the world.
Get the scoop on all the popular comics, games, movies, toys, and more every day!

Contact and Support

Advertising | Submit News | Contact ENI | Privacy Policy

©Entertainment News International - All images, trademarks, logos, video, brands and images used on this website are registered trademarks of their respective companies and owners. All Rights Reserved. Data has been shared for news reporting purposes only. All content sourced by fans, online websites, and or other fan community sources. Entertainment News International is not responsible for reporting errors, inaccuracies, omissions, and or other liablities related to news shared here. We do our best to keep tabs on infringements. If some of your content was shared by accident. Contact us about any infringements right away - CLICK HERE