Jump to content

Terminator Salvation Toys In 2009 From Playmates


JayC

Recommended Posts

I picked up John Conner and the H1 today. They're both awesome. Conner comes with the destroyed torso of a T-600 too, so it's like 2 figures in one! The destroyed T-600 also comes with his gatling gun. The T-1 comes in pieces, but it's super easy to assemble (and looks cool!)

Link to comment
Share on other sites

  • Replies 123
  • Created
  • Last Reply

Top Posters In This Topic

I really want to get my hands on one of those new " Hot Toys " T-600 Endo 12" inch figures. Has anyone else seen previews for these? They are the perfect action figure/ statue collectable. The detail is uncanny. Only problem is that it will cost me a small fortune. Try somewhere around $185.00 dollars. OUCH!!!!

Link to comment
Share on other sites

I finally decided to go ahead and pick up a couple of the 3.75" inch Terminator figures. I got the T-600 and the T-RIP. I like them overall, but I am very dissapointed with the size differential between to two. The T-RIP looks like it comes from a completely different line of action figures. Standing next to the T-600 the T-RIP is way undersized. Playmates didn't do a very good job with the scale of the 3.75" inch line. The T-600 looks like he's about 4" inches while the T-RIP is only 2" inches.

Link to comment
Share on other sites

I did find the Terminator A 10 warthog basicly to open.Man is it small.I used it for the GI Joe sense There really is no plane for the 25th Joes(I am not a fan of the Target Tiger fore Tiger Rat).Getting the joes to find in it can be done but itsa tight fit.

Link to comment
Share on other sites

Got the rest of this line about 2 days ago (forgot to post it here! ;) ) anywho, they are cool. Not perfect, but I like 'em. Best of the line is the T-600 (big Terminator with gatling gun), H1 (tank Terminator previously seen in T3), and the Endoskeletons (although I wish their mouths where closed or articulated so you could close em), and John Conner (love the broken T-600 that comes with him! And if you don't like the AT-ST pilot helmet on him, just say he's not John Conner but a random resistence fighter.) :D 8)

Link to comment
Share on other sites

there is some news over at insider and playmates has the rights for bale likeness. the harvester and wave 2 of the 6 and 3 3/4 figs will come out around agust. playmates did not say who will be in the wave but john connor is definitly in the 3 3/4 line and has bale's likeness. then they talked that they have the license for t-1 and t-2 and t-3. so if sales go well then they will do some for 2010. as i love those 3 3/4 figures, i hope those will come. this is great news for me. if the 6 insh line gets cancelled, i am ok with it but i hope for an 3 insh arnie and i want more machines to build my army.

Link to comment
Share on other sites

Well, the 3.75" action figures finally released over here. I got T-RIP, T-600, Marcus and Moto Terminator w/ John Conner. I just love these action figures, and the Endo looks really great. But Moto Terminator is just incredible, and looks just like in the movie. But the price is unbelievable as each one costs 400 Rs and Moto Terminator cost me 1000 Rs. But still, these are awesome toys. Too bad we still didn't get Hunter Killer. You guys are really lucky to get HK because that is the one toy that I was really looking forward too. Hopefully that will also get released soon because I don't want to purchase T-700 separately when it is going to come along with HK.

Link to comment
Share on other sites

Well, the 3.75" action figures finally released over here. I got T-RIP, T-600, Marcus and Moto Terminator w/ John Conner. I just love these action figures, and the Endo looks really great. But Moto Terminator is just incredible, and looks just like in the movie. But the price is unbelievable as each one costs 400 Rs and Moto Terminator cost me 1000 Rs. But still, these are awesome toys. Too bad we still didn't get Hunter Killer. You guys are really lucky to get HK because that is the one toy that I was really looking forward too. Hopefully that will also get released soon because I don't want to purchase T-700 separately when it is going to come along with HK.

 

 

thanks man. thanks to you, i just ordered myself 2 motos. i went on ebay and found some. cant wait to get them. they still are not out around my area. hope that they will make it, i mean the star trek figs are around and no sign of terminator. i would have prefers that playmates did a moto 2-pack then that crappy connor fig. well i think i can use him as an resistance fighter.

Link to comment
Share on other sites

there is some news over at insider and playmates has the rights for bale likeness. the harvester and wave 2 of the 6 and 3 3/4 figs will come out around agust. playmates did not say who will be in the wave but john connor is definitly in the 3 3/4 line and has bale's likeness. then they talked that they have the license for t-1 and t-2 and t-3. so if sales go well then they will do some for 2010. as i love those 3 3/4 figures, i hope those will come. this is great news for me. if the 6 insh line gets cancelled, i am ok with it but i hope for an 3 insh arnie and i want more machines to build my army.

I'd love to see more for them in the future! But if they go back and do some t 2 stuff i'd hope we get another crack at the basic endo with a closed mouth!

Link to comment
Share on other sites

there is some news over at insider and playmates has the rights for bale likeness. the harvester and wave 2 of the 6 and 3 3/4 figs will come out around agust. playmates did not say who will be in the wave but john connor is definitly in the 3 3/4 line and has bale's likeness. then they talked that they have the license for t-1 and t-2 and t-3. so if sales go well then they will do some for 2010. as i love those 3 3/4 figures, i hope those will come. this is great news for me. if the 6 insh line gets cancelled, i am ok with it but i hope for an 3 insh arnie and i want more machines to build my army.

I'd love to see more for them in the future! But if they go back and do some t 2 stuff i'd hope we get another crack at the basic endo with a closed mouth!

 

 

i think they did it allready. i remember reading something like this way back with a q&a from playmates. i am not 100% sure of it do. i hope to see ahnuld on a bike. i mean we get john with a bike so this set is a must. does anyone have a pic from the moto terminators?

Link to comment
Share on other sites

I took some pics of my Moto Terminators. Unfortunately the flash killed it. If you hold it in your hands, its just killer.

 

2dsmxk9.jpg

 

2ii724g.jpg

 

29na64l.jpg

 

34fb11g.jpg

 

xw37o.jpg

 

 

There is a button on top of the Terminator which when pressed, the handle bar pops out, the front panel opens up and the spikey metal thingie transforms into a seat for John. Also, underneath there's a stand which opens & closes and the guns/missiles pops out. Awesome action figure.

Link to comment
Share on other sites

I took some pics of my Moto Terminators. Unfortunately the flash killed it. If you hold it in your hands, its just killer.

 

2dsmxk9.jpg

 

2ii724g.jpg

 

29na64l.jpg

 

34fb11g.jpg

 

xw37o.jpg

 

 

There is a button on top of the Terminator which when pressed, the handle bar pops out, the front panel opens up and the spikey metal thingie transforms into a seat for John. Also, underneath there's a stand which opens & closes and the guns/missiles pops out. Awesome action figure.

 

 

 

it looks realy great. i hope to get mine soon. next week they must arrive. cant wait to have them in hand. those bike were awesome in the movie. loved when john played the guns n roses song to catch one of these bikes :D:D:D

Link to comment
Share on other sites

  • 3 weeks later...
I took some pics of my Moto Terminators. Unfortunately the flash killed it. If you hold it in your hands, its just killer.

 

2dsmxk9.jpg

 

2ii724g.jpg

 

29na64l.jpg

 

34fb11g.jpg

 

xw37o.jpg

 

 

There is a button on top of the Terminator which when pressed, the handle bar pops out, the front panel opens up and the spikey metal thingie transforms into a seat for John. Also, underneath there's a stand which opens & closes and the guns/missiles pops out. Awesome action figure.

 

 

 

it looks realy great. i hope to get mine soon. next week they must arrive. cant wait to have them in hand. those bike were awesome in the movie. loved when john played the guns n roses song to catch one of these bikes :D:D:D

 

Are these 6 inch or the horrible 3 3/4 inch scale?

Link to comment
Share on other sites

thats the 3 insh scale. this pic is one of the first of him. i dont know if he will look like that because playmates said that they are working on a new head sculpt. this is the version before they had to cover his face. sdcc will bring some news, i hope.

Link to comment
Share on other sites

  • 4 weeks later...

what no news around here either? hmmmm. then i come up with some. over at fwoosh, they have a picture of the new 3 3/4 john connor with bale likeness. the figure is

 

 

 

what can i say, for playmates standards...................................

 

 

 

@##@@ amazing. i would never imagine that playmates would made it but they deliver big time. remember that some star trek figs actualy looked like the actors? spock for instance? this is the same. he looks great. i hope that the line does well and that they go on. at least the 3 insh line should go on. the 6insh line is pretty crappy.

Link to comment
Share on other sites

what no news around here either? hmmmm. then i come up with some. over at fwoosh, they have a picture of the new 3 3/4 john connor with bale likeness. the figure is

 

 

 

what can i say, for playmates standards...................................

 

 

 

@##@@ amazing. i would never imagine that playmates would made it but they deliver big time. remember that some star trek figs actualy looked like the actors? spock for instance? this is the same. he looks great. i hope that the line does well and that they go on. at least the 3 insh line should go on. the 6insh line is pretty crappy.

I actually prefer the 6" inch line over the 3" inch.

Link to comment
Share on other sites

what no news around here either? hmmmm. then i come up with some. over at fwoosh, they have a picture of the new 3 3/4 john connor with bale likeness. the figure is

 

 

 

what can i say, for playmates standards...................................

 

 

 

@##@@ amazing. i would never imagine that playmates would made it but they deliver big time. remember that some star trek figs actualy looked like the actors? spock for instance? this is the same. he looks great. i hope that the line does well and that they go on. at least the 3 insh line should go on. the 6insh line is pretty crappy.

I actually prefer the 6" inch line over the 3" inch.

 

 

glad that you like them. for me, they arent my style. i prefer neca figs for this kind of figures. i buyed a 6insh marcus and t-600 but i was more hyped when i buyed them. when i opend them, they were a big let down in a way. i ove the 3 insh figs for army building and the harvester will fit well with this line. i got the hk yesterday and it is amazing. a little small but great.

Link to comment
Share on other sites

i think the line is dead. playmates is not doing the new john connor figure anymore. thats whats been told on fwoosh. i just hope that the harvester makes it anyway. sad actualy. i hoped for more but it seems that i am the only one anyway talking about them here @loll@ i could have seen this coming @loll@ playmates should tell peaple whats going on. i think that wave 2 could have been better then the others. knowing that some terminator 2 even terminator 1 figures had been on the way. fans should have supported the line a little more. the sales could have been better if playmates had released them everywhere like star trek. i find the star trek figs everywhere but no sign of the terminator figs.

Link to comment
Share on other sites

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Find Action Figures on Ebay

×
×
  • Create New...
Sign Up For The TNI Newsletter And Have The News Delivered To You!


Entertainment News International (ENI) is the #1 popular culture network for adult fans all around the world.
Get the scoop on all the popular comics, games, movies, toys, and more every day!

Contact and Support

Advertising | Submit News | Contact ENI | Privacy Policy

©Entertainment News International - All images, trademarks, logos, video, brands and images used on this website are registered trademarks of their respective companies and owners. All Rights Reserved. Data has been shared for news reporting purposes only. All content sourced by fans, online websites, and or other fan community sources. Entertainment News International is not responsible for reporting errors, inaccuracies, omissions, and or other liablities related to news shared here. We do our best to keep tabs on infringements. If some of your content was shared by accident. Contact us about any infringements right away - CLICK HERE